pulleys & sheaves (5088-ps)

overview of pulleys & sheaves (5088-ps)

— a sheave, is a pulley with a grooved wheel for holding a belt, wire rope, or rope. the grooved wheel spins inside the frame of the sheave. this allows the wire or rope to move freely minimizing wear and abrasion on cable. sheaves can be used to redirect a cable or rope, lift loads, and transmit power. the words sheave and pulley are sometimes used interchangeably. a sheave can also refer to a pulley which has an adjustable operating diameter for use with a mechanical belt. this is accomplished by constructing the pulley out of several pieces. the two main "halves" of the pulley can be moved closer together or farther apart, thus altering the operational diameter. the usual construction is some sort of locking collar or set screws to secure the components, one half with a threaded central shaft and one half with a threaded center. by rotating the components one can "screw" the parts closer together or further apart, thus changing the distance between the two halves and allowing the belt to ride higher or lower in the groove. common pulley and sheave materials include filled , and unfilled cast nylon products such as generic unfilled nylon, nylatron®, nylon md, oil-filled nylon and other filled grades.